© Panduit Corp. 2019
OPERATING INSTRUCTIONS
CTFP-40
ENGLISH
PA29443A01_02_ENG
Page: 6 of 8
3-2019
4. MAINTENANCE
The CTFP-40 must be
opened. Disconnect
compressed air!
4.1 ....... Cleaning
•
Unscrew hexagon socket screw (1).
•
Pull out the die set (2).
•
Clean die set (3) and lightly oil pivot (4).
•
Push in die set (5).
•
Tighten hexagon socket screw (6).
Figure 4 - Cleaning
4.2 Lubrication
•
Unscrew the head (1).
•
Remove the spring (2) and piston (3).
•
Lubricate the two arms of the die set (4) (e. g.
CHEMPLEX 746).
•
Insert arms of the die set and spring.
•
Insert head (5) and fasten fingertight.
Figure 5 - Lubrication