AT-UHD-SW-5000ED
28
Device Operation
Audio Management
The AT-UHD-SW-5000ED provides volume control and independent audio muting. Audio muting can be controlled
on
HDMI OUT
,
HDBaseT OUT
, and
ANALOG OUT
ports. To de-embed the source audio on the
ANALOG OUT
port, connect the included 5-pin captive screw connector to the
ANALOG OUT
port. De-embedding audio is
restricted to multichannel Linear PCM formats. Audio output is always downmixed to two-channel stereo.
1.
Login to the web server. Refer to
Introduction to the Web Server (page 38)
. The default username and
password are listed below:
Username:
root
Password:
Atlona
2. Click
Settings
in the menu bar.
3. Under
Audio Settings
, click and drag the Volume slider to adjust the audio output level. The current output
volume, in decibels, will be displayed in the Volume field, next to the slider bar. Audio output level can be set
within the range of -80 dB to +15 dB. The default settings is 0 dB.
4. Output audio level adjustment is complete.
Adjusting Output Volume
