AT-UHD-SW-5000ED
25
Device Operation
HDMI OUT
INPUT
3
4
5
2
1
LAN
IR
RS-232
IN
S
S
RX TX
OUT
HDBaseT OUT
DC 48V
FW
AUDIO
L
R
+
+
+
HDBaseT 2
HDBaseT 1
HDMI 3
HDMI 4
VOLUME
HDMI 5
INPUT
POWER
AT-UHD-SW-5000ED
1.
Login to the web server. Refer to
Introduction to the Web Server (page 38)
. The default username and
password are listed below:
Username:
root
Password:
Atlona
2. Click
Settings
in the menu bar.
3. Click the
Auto Switch
drop-down list and select
On
to enable auto-switching. Auto-switching is disabled by
default. If auto-switching is not desired, select
Off
from the drop-down list.
4. Selection of the active input is complete.
5. To select the input using the front panel buttons, press and release the
INPUT
button to cycle through each of
the available inputs on the unit.
Selecting the Input
The active input can be selected from the front panel, the built-in web server, or an API call. Refer to the AT-UHD-
SW-5000ED Application Programming Interface for more information.
