Panduit ATLONA AT-UHD-CLSO-601, Application Programming Interface

Page: 27 / 33

AT-UHD-CLSO-601 27
SetCmd
Defines the command used by the AT-UHD-CLSO-601 to perfom the specified function on the display (sink) device.
For example, to define the “power off” command, locate the equivalent “power off” command for the display by
consulting the display’s User Manual. Once the desired command is located, assign it to the equivalent command
used by the AT-UHD-CLSO-601. The second argument must be enclosed in brackets.
Example
SetCmd on[CRLF]
Syntax
SetCmd X[Y]
Parameter Description Range
X Action on, off, vol+, vol-, mute, fbkoff, fbkon, fbkmute
Y Command string String
Feedback
SetCmd on[CRLF]
Commands
SHostName
Sets the hostname of the unit. The hostname can be changed to easily identify the unit within Velocity
™
with
Integrated AMS or a network. Display the current hostname using the RHostName command. If using a custom
hostname, it must meet the hostname standards defined here: https://tools.ietf.org/html/rfc1123
Syntax
SHostName X
Example
SHostName CLSO601_ConfRm
Feedback
SHostName CLSO601_ConfRm
Parameter Description Range
X Name String (maximum 15 characters)