Panduit ATLONA AT-UHD-CLSO-601, Application Programming Interface

Page: 24 / 33

AT-UHD-CLSO-601 24
Commands
PWON
Issue this command to power-on the AT-HDVS-210H/U-TX, from a “power-off” (standby) state. When the unit is “on”,
the PWR LED indicator will glow solid blue.
Syntax
PWON
Example
PWON
Feedback
PWON
This command does not require any parameters
PWSTA
Returns the power state of the AT-HDVS-210H/U-TX.
Syntax
PWSTA
Example
PWSTA
Feedback
ON
This command does not require any parameters
RepCmdTime
Sets the number of time a command will be sent. Some devices may require that a command be sent multiple times
before an acknowledge message is sent back to the AT-UHD-CLSO-601. Specify the sta argument to display the
current setting.
Syntax
RepCmdTime X
Example
RepCmdTime 3
Feedback
RepCmdTime 3
Parameter Description Range
X Times to repeat command 2 ... 4, sta