background image

1

Installation Guide

AT-UHD-CAT-8

4K/UHD 

HDMI to HDBaseT

™ 

Distribution Amplifier

AT-UHD-CAT-8

The Atlona 

AT-UHD-CAT-8

 is a 4K/UHD HDMI to HDBaseT distribution amplifier featuring pass-

through HDMI input connections, eight HDBaseT outputs and display control capability. Each 

output transmits AV and control signals up to 230 ft. (70 m) @ 1080p and 130 ft. (40 m) @ 4K/

UHD. Features include 4K/UHD @ 60 Hz with 4:2:0 color subsampling, HDCP 2.2 compliance, 

EDID management, and PoE for powering remote receivers. A wide variety of consumer 

displays may be controlled by the UHD-CAT-8 using CEC*. Designed for commercial distribution 

applications, the UHD-CAT-8 is control system-friendly and integrates with any TCP/IP, RS-232, 

or IR control system and features a 1U, full-rack width enclosure with external, international 

power supply. Compatible Atlona receiver: AT-UHD-EX-70C-RX.

IMPORTANT

: Visit http://www.atlona.com/product/AT-UHD-CAT-8 for the latest firmware 

updates and User Manual.

1 x AT-UHD-CAT-8

1 x IR emitter (AT-IR-CS-TX)

9 x 5-pin captive screw connector

2 x Rack Ears (short)

4 x Screws (MAS-MJ05+10D for Rack Ear)

1 x 48 V / 3.12 A power supply

1 x AC cord

1 x Installation guide

Package Contents

Summary of Contents for ATLONA AT-UHD-CAT-8













Reviews: