manualshive.com logo in svg

Panduit Atlona AT-OME-ST31A, Manual, Page: 8 / 54

Share
Download
Panduit Atlona AT-OME-ST31A Manual Download Page 8

AT-OME-ST31A

8

The Atlona 

AT-OME-ST31A

 is a 3×1 switcher and HDBaseT transmitter with HDMI and USB-C inputs.  Part of the 

Omega™ Series of integration products for modern AV communications and collaboration, it features mirrored HDMI 

and HDBaseT outputs, two-channel audio de-embedding to an analog balanced audio output, and is HDCP 2.2 

compliant.  The USB-C input is ideal for AV interfacing for newer Mac®, Chromebook™, and Windows® PCs, as well 

as smartphones and tablets. Video signals up to 4K/60 4:2:0 can be transmitted over HDBaseT up to 330 feet (100 

meters). All inputs and the local HDMI output support 4K HDR and 4K/60 4:4:4 at HDMI data rates up to 18 Gbps. 

Additionally, 4K downscaling to 1080p is available for the HDMI output when connected to an HD sink. The OME-

ST31A is designed for use with Omega™ Series receivers and switchers, select HDVS Series receivers, the AT-UHD-

EX-100CE-RX receiver, and other Atlona switchers with HDBaseT inputs.

Introduction

Features

Package Contents

• 

3×1 HDBaseT switcherwith HDMI and USB-C inputs

• 

Mirrored HDBaseT and HDMI outputs

• 

Selectable 4K to 1080p downscaling

• 

Remote PoE (Power over Ethernet) over HDBaseT or local powering

•  Automatic input selection and automatic display control
• 

Audio de-embedding

1 x AT-OME-ST31A

1 x USB-C cable

2 x Mounting brackets

4 x Mounting screws

1 x Installation Guide

Summary of Contents for Atlona AT-OME-ST31A























































Reviews:

No comments