AT-JUNO-451-HDBT
35
A/V Settings page
The Web GUI
Input Selection
Click this drop-down list to select the desired input.
Auto Switch
Set the
Auto Switch
mode toggle to
ON
to enable auto-switching. When auto-switching is enabled, the switcher
will automatically switch to the previous input, if a signal loss is detected on the current input. If a new source is
connected, the AT-JUNO-451-HDBT will automatically switch to that input. The default setting is
ON
.
HDCP Settings
Sets the HDCP reporting mode of the specified HDMI port: Input 1 = INPUT 1 (HDBaseT), Input 2 = INPUT 2,
Input 3 = INPUT 3, Input 4 = INPUT 4. Some devices will transmit HDCP content if an HDCP-compliant display/sink
is detected. Setting this value to OFF, will instruct the source to send non-HDCP content (if possible) to non-HDCP
display and/or sink devices. Note that setting this value to OFF will not decrypt HDCP content.
Setting
Port
Input 1
INPUT 1 (HDBaseT)
Input 2
INPUT 2
Input 3
INPUT 3
Input 4
INPUT 4
Setting
Description
ON
HDCP content is always transmitted by the source
OFF
Instructs the source to send non-HDCP content, if possible
Video
