AT-HDVS-210H-TX-WP
22
The Web GUI
Input Selection
Click the drop-down list to select the desired input.
Setting
Description
Input 1
HDMI 1
Input 2
HDMI 2
Input
Description
Previous
Automatically switches to the input that was connected last.
HDMI1
Switches to
HDMI 1
.
HDMI2
Switches to
HDMI 2
.
Auto Switch
Three controls are available under the Auto Switch feature.
• Auto Switch
Click this toggle switch to enable or disable auto-switching. When enabled, the AT-HDVS-210H-TX will
automatically switch to the another port, if the signal is disrupted on the currently active input. The port to be
switched to, is defined in the
Fallback Input
drop-down list.
• Fallback Input
Click this drop-down list to select the fallback port. If the source is disconnected from the active port, then the
switcher can be configured to automatically switch to the desired port. Click the
Auto Switch mode
toggle to
enable or disable auto-switching.
A/V Settings page
