Panduit Atlona AT-HDVS-150-TX-HDMI, Manual, Page: 8 / 27

AT-HDVS-150-TX / AT-HDVS-150-TX-PSK 8
The Atlona AT-HDVS-150-TX is a 3×1 switcher with display control for HDMI and VGA transmission over HDBaseT™.
It features two HDMI inputs plus a VGA input with 3.5mm audio connector. The AT-HDVS-150-TX combines the
benefits of a switcher with built-in auto-switching and the advantages of long-distance HDBaseT signal extension
over a single cable. HDMI signals up to 4K/UHD @ 60Hz with embedded audio, VGA input signals up to 1920×1200
video, and control signals can be extended up to 230 feet (70 meters). The switcher enables auto display on/off,
auto-switching, along with other features. The switcher receives power from the AT-HDVS-150-RX using Power over
Ethernet. The AT-HDVS-150-TX is ideal for long distance transmission and display control in corporate or educational
settings using analog and digital sources.
The Atlona AT-HDVS-150-TX-PSK is identical to the AT-HDVS-150-TX, with the addition of local powering capability
and an external power supply. This makes it ideal for extending AV and control directly to a projector with an HD-
BaseT input. The AT-HDVS-150-TX can serve as the central component of a small, automated AV system through
automatic input selection, and by sending RS-232 control commands to the display. With automatic display control
capability, the AT-HDVS-150-TX can power the display on or off whenever a source is connected or disconnected
from the unit.
1 x AT-HDVS-150-TX
1 x Mounting ears (pair)
1 x Installation Guide
AT-HDVS-150-TX AT-HDVS-150-TX-PSK
1 x AT-HDVS-150-TX-PSK
1 x 2-pin Phoenix connector
1 x 48V DC power supply
1 x Mounting ears (pair)
1 x Installation Guide
• Two HDMI inputs plus a VGA input with 3.5mm audio connector.
•
Extends 1080p up to 230 feet (70 meters) and 4K/UHD up to 130 feet (40 meters) using CAT6a/7 cable.
• Automatically changes projector power state based on active or standby mode of the switcher (in conjunction
with the AT-HDVS-150-RX). Control signals are transmitted via RS-232.
• Combines analog audio and VGA onto HDBaseT output.
• Field-upgradable via USB interface.
• Includes external power supply (AT-HDVS-150-TX-PSK only) – ideal for point-to-point installations with an
HDBaseT-equipped display or projector.
• Front panel input select button.
• Automatic input selection using 5-volt detection.
Introduction
Features
Package Contents