AT-HDR-SW-52ED
18
Device Operation
Switching Modes
The AT-HDR-SW-52ED features two switching modes:
Mirrored
and
Matrix Mode
. Each of these modes will be
covered in the following section. Switching modes are configured using the built-in web server.
This is the default mode. Once video is detected on the active input port, the output signal will be displayed on
both the
HDMI OUT
and
HDBaseT OUT
port. The active input will be identified on the front panel HDMI LED input
indicators and will be displayed as a solid green LED.
can also be enabled, if desired,
to allow the AT-HDR-SW-52ED to automatically switch between inputs, if a new source is connected or an existing
source is disconnected.
1. Log in to the web server.
2. Click
A/V Settings
in the menu bar.
3. Click the
Switching Mode
drop-down list and select
Mirrored
.
Mirrored Mode