AT-HDR-SW-52ED
59
Configuration and Management Interfaces
A/V Settings page
The
A/V Settings
page is divided into three sections:
Video
,
Audio
, and
HDCP
. The
Video
section provides
controls for switching modes and input selection. The
Audio
section provides options to control the output audio
volume and de-embedding. The
HDCP
section controls whether or not HDCP content is allowed to pass.
Input Selection
Click this drop-down list to manually select the desired input.
Switching Mode
Click this drop-down list to manually select the switching mode. Refer to
information.
Setting
Description
Input 1
Sets
HDMI IN 1
as the active input.
Input 2
Sets
HDMI IN 2
as the active input.
Input 3
Sets
HDMI IN 3
as the active input.
Input 4
Sets
HDMI IN 4
as the active input.
Input 5
Sets
HDMI IN 5
as the active input.
Video
Setting
Description
Mirrored
This is the default switching mode. Once video is detected on any of the input ports, the
output signal will be displayed on
both
HDMI OUT
and
HDBaseT OUT
ports.
Matrix Mode
This mode allows the AT-HDR-SW-52ED to independently switch between any input to
any output.
