AT-HDR-SW-52ED
42
Device Operation
3.
Continue fine-tuning the device selection by clicking the
Products
and
Model
drop-down lists. Once all fields
have been set to the proper values, the AT-HDR-SW-52ED will populate the command fields with the proper
values, based on the selected device.
4. Some devices may require that the command be sent multiple times before an acknowledge message is received
from the display. Refer to the User Manual for the display device for more information. If the command must be
repeated, continue with the following steps. Otherwise, skip to Step 5.
a. Under
Repeat Command
, click the
Status
toggle switch to the
ENABLED
position.
b. Click the
Times
drop-down list and select the number of times which the command must be sent to the
device, before an acknowledge message is returned. The available values are
2
,
3
, and
4
.
5. If
Generic
was selected as the manufacturer, then manually enter the required strings for each operation.
Refer to the next page for information on formatting command strings.