AT-HDR-SW-52ED
41
Device Operation
Completing RS-232 or IP Configuration
Once RS-232 or IP control has been configured, the commands for power, volume, muting, and volume will need to
be assigned.
1. Scroll down to the bottom of the page and locate the
RS-232 / IP commands
section.
2. Click the
Manufacturer
drop-down list and select the manufacturer of the device that is being controlled. In the
example below,
Samsung
is selected.
NOTE:
If the manufacturer is not listed in the drop-down list, then select
Generic
.
When
Generic
is selected, the
Products
and
Model
drop-down lists will be disabled.