AT-UHD-CAT-4ED
39
Appendix
Updating the Valens Firmware
Updating the Valens firmware can be completed using either the USB interface or the web server. Atlona
recommends using the web server for updating the Valens firmware. However, if a network connection is not
available, the AT-UHD-CAT-4ED Valens firmware can be updated using a USB-A to USB mini-B cable.
Using the Web Server
Requirements:
• AT-UHD-CAT-4ED
•
Firmware file
• Computer running Microsoft Windows
1.
Connect an Ethernet cable from the computer, containing the firmware, to the same network where the AT-UHD-
CAT-4ED is connected.
2. Go to the
in the web server.
3. Click the
Choose File
button, under
Valens Update
.
4.
Browse to the location of the firmware file, select it, and click the
Open
button.
5. Click the
Update
button to begin the update process.
6.
The following message box will be displayed.
7. Click the
OK
button to begin the firmware update process. Click the
Cancel
button to cancel the process.
8. After the firmware update process is complete, the
Login
screen will be displayed, indicating that the update
process is complete.
Choose File button
