AT-HDR-CAT-2
40
Configuration and Management Interfaces
HDCP
Click this drop-down list to select the HDCP reporting mode.
Setting
Description
Compliant
Allows the source device to send HDCP content to an HDCP-compliant display. This is
the default setting.
Non-compliant
Will attempt to force the source device to ignore detection of HDCP-compliant
displays, allowing non-HDCP content to be transmitted from the souce (if possible).
Note that some source devices, such as PlayStation
™
console systems and Mac
®
computers always send HDCP content. Selecting the
Non-compliant
option
will not
decrypt or circumvent HDCP-protected content.
Setting
Description
ON
Audio is de-embedded and sent to the
AUDIO OUT
port.
OFF
Audio is disabled on the
AUDIO OUT
port.
A/V Settings page
Analog Output
Click this toggle switch enable or disable audio output on the
AUDIO OUT
port.
Analog Audio Output Volume
Click and drag this slider to adjust the audio volume on the
AUDIO OUT
port.
Settings
