AT-DISP-CTRL
31
Configuration and Management Interfaces
EDID Settings
Click the Input drop-down list to select the desired EDID. When selecting an EDID, make sure that the display/sink
device is capable of supporting the resolution/timing. If the sink device is not able to support a feature, then the
source will not be displayed. Selecting the
Default
EDID will provide the most compatible settings for most displays.
In addition, two memory locations are available for storing captured EDID data. If an EDID is stored in a memory
location, it will also be added to the list available EDID selections. The following EDID presets are available.
EDID Saved
The AT-DISP-CTRL provides two memory locations used for storing captured EDID data. Click these drop-down lists
to select and store the external EDID.
Save
Click the
Save
button, next to the
MEM 1
and
MEM 2
fields, to save the EDID in the selected memory location.
HDCP Setting
Click this drop-down list to select either Compliant or Noncompliant. Refer to
for more
information.
EDID listing
Default
ATL 4K60 420 HDR 2CH
ATL 1080p 3D 2CH
ATL 4K60 420 HDR MCH
ATL 1080p 3D DD
ATL 4K60 444 2CH
ATL 1080p 3D MCH
ATL 4K60 444 MCH
ATL 1080p 2CH
MEM_1
ATL 4K60 420 2CH
MEM_2
ATL 4K60 420 MCH
EDID Page
This page provides controls for selecting and storing EDID data. Refer to
for more
information.
