manualshive.com logo in svg

Panduit ALTONA AT-ANC-108D, Manual, Page: 31 / 65

Share
Download
Panduit ALTONA AT-ANC-108D Manual Download Page 31

AT-ANC-108D

31

Device Operation

Restoring System Configuration

Once a system configuration has been saved as an .xml file, this file can be uploaded to the AT-ANC-108D, allowing 

a system configuration to be restored.  Both the 

Download

 and 

Restore

 feature are useful for saving and loading 

different configurations and/or to provide a backup, in the unlikely event of a system failure. When a system 

configuration file is uploaded, it will overwrite the current settings.

1. 

Login to the web server.  Refer to 

Logging In (page 26)

 for more information.

2.  Click the 

System Settings

 tab.

3.  Click the 

Browse...

 button and select the desired system configuration file.  Once the file is selected, the 

selected filename will appear next to the 

Browse...

 button.

4.  Click the 

Restore

 button to upload the configuration file to the AT-ANC-108D.

5. 

The following message box will be displayed, confirming overwrite of the current configuration.  Click 

OK

 to 

continue with process or click 

Cancel

 to abort.

6. 

One the upload has started, a progress message will be displaying the restore process.

7. 

Once restore process has completed, the message “XML Restore Finish! Please Refresh Page!” will be displayed.  

Refresh the page.

8.  The 

Login

 page will be displayed.

9.  The restoration process is complete.

Filename

IMPORTANT:  

IP Mode information is stored as part of the configuration file.  Therefore, caution 

should be exercised when sharing configuration files between multiple AT-ANC-108D units.  If the 

unit is set to 

static

 IP mode, then restoring multiple units with the same configuration file will result in 

the same IP address being shared between multiple units, causing an IP conflict on the network.

 

However

, pre-configured device files, which are available from the Atlona web site, will not erase 

current network settings on the AT-ANC-108D.

 

Summary of Contents for ALTONA AT-ANC-108D


































































Reviews:

No comments