16
TRK-MPC5604P EVB User Manual
6.4.1
J6 – CAN Signals To Transceiver Enable CAN_EN
Enables TXD and RXD signals to the CAN transceiver. By default, the
jumpers are installed.
Figure 6-7: CAN_EN (J6)
6.5
Virtual Serial Port
The TRK-MPC5604P board has a built-in virtual serial port which may be
connected to the MPC5504P processor’s SCI. This allows certain PC
applications to be able to connect in a serial fashion to the microcontroller
without the actual use of serial port hardware. It can be enabled or disabled
by installing or removing the jumpers J7 and J8.
6.5.1
J7 - RS232 TXD Signal
Figure 6-8: TXD_EN (J7)
6.5.2
J8 - RS232 RXD Signal
Figure 6-9: RXD_EN (J8)
6.6
LIN Channels/Connectors
The TRK-MPC5604P board provides two jumper selectable LIN channels to
two jumper selectable LIN connectors.