User Manual For CYCLONE Programmers
42
7.3
Home Screen
The home screen appears when the Cyclone is powered on, or when the
Home button
is tapped.
7.3.1
Icons
A row of icons in the upper right corner indicates the status of various attributes of the Cyclone.
Note:
The user may tap on the row of icons to view the meaning of each of the currently displayed icons.
Cyclone Unit Status:
Ok / Bad
Programming Status:
Ready / Busy
Target Power Relays
: On / Off
USB-To-PC Enumerated:
Yes / No
Real-Time clock Enabled & Working:
Yes / No
Cyclone Power Relays:
Closed / Open
Target Device Is Powered*
: Yes / No
SDHC Memory Card:
None / Valid / Unformattted / Reset Cyclone**
*
Target Device Is Powered - “Yes” indicates that the
CYCLONE
detects power on the Vcc pin of
the target device programming header.
** SDHC Memory Card (CYCLONE
FX
Only) - “Reset Cyclone” indicates that the
CYCLONE
needs to be reset before the SDHC card will register as Valid. The user can push the Reset button
which is located on the front side of the Cyclone, below the LED indicators.
7.3.2
Configurable Display Area
The main area of the home screen can be configured to optionally display the following
information, by using the Cyclone IP Configuration Utility (see
Section 9.6.1 - LCD Home Screen
1. Firmware version of the Cyclone (always shown).
2. IP address assigned to the Cyclone.
3. Name assigned to the Cyclone.
4. Number of programming images in the Cyclone’s memory.
5. Name of the selected programming image.
6. First serial number associated with the selected image
7. Current status.
8. Results of the last operation performed.
9. Time and date.
10. Status Window and Main Menu button (always shown).
7.4
Status Window
The status window appears in the lower left corner of the home screen and displays the results of
programming operations.
7.4.1
Error Information Icon
When the Cyclone experiences an error during programming operations, the Info icon will appear
to the left of the Menu button (or AUX button, if configured).
