manualshive.com logo in svg

P&E Microcomputer Systems Cyclone LC Series, User Manual, Page: 49 / 149

Share
Download
P&E Microcomputer Systems Cyclone LC Series User Manual Download Page 49

User Manual For Cyclone LC Programmers

49

Figure 6-1: Cyclone Image Creation Utility

6.1.1

Specify CPU Manufacturer

The user should select the manufacturer of their target device from the drop-down list. 

Cyclone LC

 programmers support ARM Cortex devices from several manufacturers, including 

NXP’s Kinetis and LPC devices. For a complete index of PEmicro-supported ARM Cortex devices, 
please view 

pemicro.com/arm

.

 

If you are using 

PEmicro Part# CYCLONE-LC-UNIV

, this Cyclone also supports these 8-16/32-bit 

architectures: NXP’s S32, ColdFire® V2/V3/V4, C/V1, MPC5xx/8xx, MPC55xx-57xx, 
DSC, ARM® Nexus (MAC7xxx), S12Z, HC(S)12(X), HCS08, HC08, and RS08 devices, as well as 
STMicroelectronics’ SPC5 & STM8 (

w/ adapter

) devices.

Figure 6-2

 shows the Specify CPU Manufacturer drop-down box. The options are:

•

ARM-based (All Manufacturers)

•

NXP

•

STMicroelectronics

Summary of Contents for Cyclone LC Series






















































































































































Reviews:

No comments