PANAVISION PANALUX SONARA 4:4, Manual, Page: 34 / 43

Fault Finding Tips
Power Characteristics Physical Characteristics
Issue Possible Solution
No power seen and rocker switch not lit Fuse in casket blown. Try replacement.
No response from controller on power up or splash screen
Confirm that the controller is located firmly and squarely
in the trough and held by the magnets. Check to see if
the lanyard is hindering the controller’s positioning.
No response from controller in remote mode
Confirm that both ends of the cable are fitted correctly
into the housings on the head and the controller and that
the keyway aligns.
Two or more fixtures on the same address are behaving
differently on dimming or CCT Ensure that all fixtures are set in the same option for
personality, dimming curve, and FLAT/BOOST.
One or more fixtures on a DMX Universe are flashing or
behaving oddly Confirm that none of the fixtures are in PRIMARY/CLONE
mode.
Characteristic Value
AC power / nominal input
voltage
110-240V (AC) 50-60Hz
Max input current 14A (110V) / 7A (230V)
Max power input 1500W
Characteristic Value
Dimensions (excluding
yoke) 1248 x 1248 x 134 (mm)
49 x 49 x 5.25 (inches)
Dimensions (including
yoke) 1486 x 1546 x 163 (mm)
58.5 x 61 x 6.5 (inches)
Weight (excluding
accessories)
44kg
Weight (excluding yoke) 38kg
LATEST VERSION AS OF JULY 2021 PANALUX SONARA 4:4 USER MANUAL 34