SW150 Lens Adaptor Assembly Instructions
1
2
3
4
Stage 1
The Lens Adaptor is made up of three rings:
1. Front Ring (small lugs)
2. Compression Ring (red)
3. Locking Ring
All three rings are supplied screwed together, unscrew from each other
before assembly.
To fi x the Lens Adaptor, the lens must be off the camera.
Stage 2
Place the front ring over the lens shade, with the small lugs furthest from the lens body. The ring should
locate into the correct position.
Stage 3
Invert the lens, keeping the front ring in place with your fi ngertips.