Panasonic WV-X5550LT Operating Instructions Manual Download Page 48

Page: 48 / 100

2.6 Configure the alarm settings [Alarm]

Settings related to alarm notifications can be configured on the “Alarm” page.

2.6.1 Configuration of the settings relating to alarm notification
[Notification]

The settings relating to Panasonic alarm protocol and HTTP alarm notification can be configured in this section.

2.6.1.1 Configure the settings relating to Panasonic alarm protocol

Panasonic alarm protocol notification

[Panasonic alarm protocol]

Select “On” or “Off” to determine whether or not to provide notification by Panasonic alarm protocol according
to the settings for the “Alarm” and “Diag.” checkboxes of “Destination of notification” below.

Operating Instructions

2 Settings

Summary of Contents for WV-X5550LT





































































































Search results

Summary of Contents for WV-X5550LT

Reviews:

Related manuals for WV-X5550LT

Brands by name

Popular brands

Panasonic WV-X5550LT, Operating Instructions Manual

Search results

Summary of Contents for WV-X5550LT

Reviews:

Related manuals for WV-X5550LT

Brands by name

Popular brands