![background image](http://html.mh-extra.com/html/panasonic/wv-x5550lt/wv-x5550lt_operating-instructions-manual_1511970030.webp)
2.5.2 Configure the settings relating to live page (initial display)
[Image]
"Live" page (Initial display)
Configure the settings relating to the initial images displayed on the “Live” page.
[Initial display stream]
Select the image to display on the “Live” page from the following.
Dual Stream(2)/Dual JPEG(2)/Source1-Stream(1)/Source1-Stream(2)/Source1 JPEG(1)/Source2-Stream(1)/
Source2-Stream(2)/Source2 JPEG(1)
•
Default:
Dual Stream(2)
Note
•
When “JPEG(1)” or “JPEG(2)” is selected, the refresh interval can be selected.
MJPEG/Refresh interval: 1s/Refresh interval: 3s/Refresh interval: 5s/Refresh interval: 10s/Refresh
interval: 30s/Refresh interval: 60s
•
Can be selected when “On” is selected for “Stream transmission” of Stream(1)/Stream(2).
•
When the image capture size of JPEG(1) is 1280x960, the image capture size of JPEG(2) is set to
VGA.
[Refresh interval (JPEG)*]
Select an interval to refresh the displayed JPEG image from the following.
When Dual sources [4:3](15fps mode) is used:
0.1fps/0.2fps/0.33fps/0.5fps/1fps/3fps/5fps/10fps/15fps
When Single source [4:3](30fps mode) is used:
0.1fps/0.2fps/0.33fps/0.5fps/1fps/3fps/5fps/10fps/15fps/30fps
When Dual sources [4:3](12.5fps mode) is used:
0.08fps/0.17fps/0.28fps/0.42fps/1fps/3.1fps/4.2fps/5fps/8.3fps/12.5fps
When Single source [4:3](25fps mode) is used:
0.08fps/0.17fps/0.28fps/0.42fps/1fps/3.1fps/4.2fps/5fps/8.3fps/12.5fps/25fps
•
Default:
5fps
Note
•
When “On” is selected for “Stream transmission”, the refresh interval may be longer than the set value
when any value with an asterisk (*) on the right is selected.
•
Depending on factors such as the network environment, the resolution, the image quality, or the number
of computers concurrently accessing the camera, the transmission interval may be longer than the set
value.
•
If images are not delivered in the specified transmission interval, you can make the images be delivered
closer to the specified time by lowering the resolution or image quality.
30
Operating Instructions
2 Settings