Note
•
When “Manual” is selected, “Off”, “1 Frame Skip”, “2 Frames Skip”, “4 Frames Skip”, “6 Frames
Skip”, or “8 Frames Skip” can be selected for frame skip by right-clicking on the “Live” page. The value
selected here will revert to “Off” when the browser is closed.
[Viewer software (nwcv4Ssetup.exe)] - [Contrast enhancement(RGB:0 to 255)]
Select “On” or “Off” to determine whether or not to enhance the contrast of H.265 images or H.264 images on
the “Live” page.
If “On” is selected, the range of RGB signal on display is extended from 16-235 to 0-255.
When there is a bright part in an image, the intensity may be overexposed. Select a setting suitable to your
usage environment.
•
Default:
Off
Note
•
This setting is only available when viewing images on the “Live” page with Internet Explorer.
•
Even if this setting is changed, transmitted image data is not changed.
2.5 Configure the settings relating to images
[Image]
The settings relating to JPEG, H.265, and H.264 images such as the settings of image quality, etc. can be
configured on this page.
The “Image” page has the [Image] tab and the [Image quality] tab.
2.5.1 Configure the settings relating to the image capture mode
[Image]
Click the [Image] tab on the “Image” page. (
®
[Image capture mode]
Select an image to display in the live screen, etc.
Dual sources [4:3](15fps mode)/Dual sources [4:3](12.5fps mode)/Single source [4:3](30fps mode)/Single
source [4:3](25fps mode)
Default:
Dual sources [4:3](15fps mode)
Note
•
When “Dual sources [4:3](15fps mode)” or “Dual sources [4:3](12.5fps mode)” is selected, images from
Source1 and Source2 are transmitted.
•
When “Single source [4:3](30fps mode)” or “Single source [4:3](25fps mode)” is selected, only images
from Source1 are transmitted.
•
When the settings are changed from “Dual sources [4:3](15fps mode)” or “Dual sources [4:3](12.5fps
mode)” to “Single source [4:3](30fps mode)” or “Single source [4:3](25fps mode)”, the camera restarts.
Operating Instructions
29
2 Settings
