Panasonic WV-SUD638 Operating Instructions Manual Download Page 75 | Manualshive

Page: 75 / 212

Panasonic WV-SUD638 Operating Instructions Manual Download Page 75

8.5.4 Configure the settings relating to the auto pan function
(“Auto pan” setup menu)

Click the [Setup>>] button of “Auto pan” on the [Image/Position] tab of the “Image/Audio” page (

The settings relating to the auto pan function can be configured with the setup menu.

Position

[Left end position setup]

Move the camera to the desired point to be set as the left end position point of the auto panning using the
control pad/buttons and adjust the image using the [Zoom] buttons and the [Focus] buttons.
The zoom and focus settings are set together with the start point.

[Right end position setup]

Move the camera to the desired point to be set as the right end position point of the auto panning using the
control pad/buttons, and then click the [Set] button to register the position as the right end position.

Operating Instructions

75

8 Configure the settings relating to images and audio [Image/Audio]

«
...
73
74
75
76
77
...
»

Summary of Contents for WV-SUD638





















































































































































































































Reviews:

No comments