An authentication screen is displayed after reconnecting to the camera. Enter the registered user name and
password to use the camera.
Viewer software
It is necessary to install the viewer software “Network Camera View 4S” (ActiveX
®
) to display images on a PC.
This software can be installed directly from the camera or by selecting the [Install] button next to [Viewer
Software] on the menu of the CD-ROM provided, and then following the on-screen instructions.
IMPORTANT
•
The default setting of “Automatic installation” is “On”. Follow the instructions on page 208 when the
message is displayed on the information bar of the browser.
•
When the “Live” page is displayed for the first time, the install wizard of the ActiveX control required to
display images from the camera will be displayed. Follow the instructions of the wizard.
•
When the install wizard is displayed again even after completing the installation of the ActiveX, restart
the PC.
•
The viewer software used on each PC should be licensed individually. The number of installations of
the viewer software from the camera can be checked on the [Upgrade] tab of the “Maintenance” page
(
page 182). Refer to your dealer for the software licensing.
4
Operating Instructions
Preface
