Panasonic WV-SPW611 Operating Instructions Manual Download

Page: 40 / 212

9 Display the setup menu from a PC

The settings of the camera can be configured on the setup menu.

IMPORTANT

•

The setup menu is only operable by users whose access level is “1. Administrator”. Refer to
page 134 for how to configure the access level.

9.1 How to display the setup menu

Display the “Live” page. (

page 7)

Click the [Setup] button on the “Live” page.

→

The window with the user name and password entry fields will be displayed.

Click the [OK] button after entering the user name and the password.
The default user name and password are as follows.
User name: admin
Password: 12345

Operating Instructions

9 Display the setup menu from a PC

Summary of Contents for WV-SPW611





















































































































































































































Search results

Summary of Contents for WV-SPW611

Reviews:

Related manuals for WV-SPW611

Brands by name

Popular brands

Panasonic WV-SPW611, Operating Instructions Manual

Search results

Summary of Contents for WV-SPW611

Reviews:

Related manuals for WV-SPW611

Brands by name

Popular brands