manualshive.com logo in svg

Panasonic WV-SPN311, Operating Instructions Manual

Share
Download
Panasonic WV-SPN311 Operating Instructions Manual Download Page 91

11.4  Configure the settings relating to image adjust,
zoom/focus, privacy zone, VIQS, and lens distortion
compensation [Image quality]

Click the [Image quality] tab on the “Image/Audio” page. (

®

page 41, page 43)

When the [Setup>>] button of each setting item is clicked, the detailed settings menu will be displayed in a
newly opened window. The detailed settings can be configured while monitoring images displayed on the
[Image quality] tab.
The settings relating to image adjust, zoom/focus, back focus, extra optical zoom, privacy zone, VIQS, and
lens distortion compensation can be configured in this section.

[Image adjust]

Click the [Setup>>] button to display the setup menu that can configure the settings relating to image quality.
The setup menu will be displayed in a newly opened window. (

®

page 92)

[Back focus] 

S P   N311

S P   N311

Click the [Setup>>] button to display the setup menu that can configure the settings relating to the back focus.
The setup menu will be displayed in a newly opened window.

[Extra optical zoom]

Click the [Setup>>] button to display the setup menu that can configure the extra optical zoom. The setup menu
will be displayed in a newly opened window.

[Privacy zone]

Click the [Setup>>] button to display the setup menu that can configure the settings relating to the privacy
zone. The setup menu will be displayed. (

®

page 104)

[VIQS]

Click the [Setup>>] button to display the setup menu that can configure the settings relating to VIQS. The setup
menu will be displayed. (

®

page 108)

Operating Instructions

91

11 Configure the settings relating to images and audio [Image/Audio]

Summary of Contents for WV-SPN311



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands