![background image](http://html1.mh-extra.com/html/panasonic/wv-sfv481/wv-sfv481_operating-manual_4195474071.webp)
•
When the image refresh interval is short, notification/recording timing or interval may become incorrect.
Notification/recording may also not be performed correctly as configured when multiple users are
receiving images. In this case, set the refresh interval longer.
•
There are limited times to overwrite on an SD memory card. When having a high frequency of
overwriting, the lifetime of the SD memory card may become shorter.
•
A lifetime of an SD memory card should be influenced by the number of the image files stored and log
savings on the SD memory card. Selecting “H.264(1)” or “H.264(2)” for “Recording format” can reduce
the number of files that can be stored on the SD memory card.
•
If the data writing speed goes down after data is repeatedly written on an SD memory card, we
recommend replacing the SD memory card.
[Audio recording]
Select whether or not to save audio data when saving video data in MP4 format.
•
Off:
Does not save audio data to videos (MP4 format).
•
On:
Saves audio data (AAC-LC format) to videos (MP4 format).
Default:
Off
[Remaining capacity notification]
When the E-mail notification function or the Panasonic alarm protocol function is used to provide notification
of the remaining capacity of the SD memory card, select a level to be notified at from the following.
50%/ 20%/ 10%/ 5%/ 2%
•
Default:
50%
Note
•
Notification will be provided each time the remaining capacity of the SD memory card reached the
values above.
For example, notification will be provided each time the remaining capacity reaches 50%, 20%, 10%,
5% and 2% when “50%” is selected. Notification may not always be made at the very moment when
the remaining capacity of the SD memory card has reached each value.
[Overwrite]
Determine whether or not to overwrite when the remaining capacity of the SD memory card becomes
insufficient.
•
On:
Overwrites when the remaining capacity of the SD memory card becomes insufficient. (The oldest
image is the first to be overwritten.)
•
Off:
Stops saving images on the SD memory card when the SD memory card becomes full.
•
Default:
Off
Recording stream
[Recording format]
Select the type of image data to be recorded on the SD memory card.
•
JPEG(1):
Records still image data (JPEG(1)). The data is recorded in accordance with the settings of
“JPEG(1)” on the [JPEG/H.264] tab of the “Image/Audio” page.
•
JPEG(2):
Records still image data (JPEG(2)). The data is recorded in accordance with the settings of
“JPEG(2)” on the [JPEG/H.264] tab of the “Image/Audio” page.
•
H.264(1):
Records video data (H.264(1)) in the MP4 video encoding format. The data is recorded in
accordance with the settings of “H.264(1)” on the [JPEG/H.264] tab of the “Image/Audio” page.
•
H.264(2):
Records video data (H.264(2)) in the MP4 video encoding format. The data is recorded in
accordance with the settings of “H.264(2)” on the [JPEG/H.264] tab of the “Image/Audio” page.
•
Default:
JPEG(1)
Operating Instructions
71
10 Configure the basic settings of the camera [Basic]