11.10 Configure the settings relating to audio
[Audio]
Click the [Audio] tab on the “Image/Audio” page. (
®
The settings relating to audio can be configured on this page.
Note
•
Images and audio will not be synchronized. Therefore, images and audio may not always match.
•
Audio may be interrupted depending on the network environment.
[Audio transmission/reception]
Select "Off" or "Mic input" to determine whether to receive audio data from the camera to the PC.
•
Off:
Does not receive audio data from the camera to the PC.
•
Mic input:
The PC receives audio data from the camera. Audio can be heard with images on the PC.
Images and audio will not be synchronized.
•
Default:
Off
Note
•
“Audio recording” and “Audio detection” only operate when “Mic input” is selected for “Audio
transmission/reception”.
[Audio encoding format]
Select the audio reception encoding format from G.726, G.711, AAC-LC and AAC-LC (HIGH QUALITY).
•
Default:
G.726
IMPORTANT
•
When “AAC-LC (HIGH QUALITY)” is selected, there are limitations about the following function.
–
“SD memory card” is not available.
–
“Audio detection” is not available.
–
HTTPS is not available.
–
The maximum concurrent access number is limited to 5.
[Audio bit rate]
Select the audio bit rate used to receive audio data.
When G.726 is selected for "Audio encoding format" : 16kbps/ 32kbps
When AAC-LC (HIGH QUALITY) is selected for "Audio encoding format" : 64kbps/ 96kbps/ 128kbps
100
Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]
