WV-SF138
Super Dynamic Full HD
Dome Network Camera
Full HD / 1,920 x1,080 H.264 Network Camera featuring
Super Dynamic
Key Features
• Wide coverage : Horizontal: 100 °, Vertical: 81 °(3 megapixels [4:3])
• Low profile design for discrete installation
•
1080p
HD images up to 30 fps
• 3.1 Megapixel high sensitivity MOS Sensor
• Super high resolution at Full HD/1,920 x 1,080 created by
3.1Megapixel high sensitivity MOS Sensor
• Multiple H.264 (High profile) streams and JPEG streams ensure
simultaneous real time monitoring and high resolution recording by
new “UniPhier
®
”, Panasonic’s proprietary System LSI platform.
• Full frame (Up to 30 fps) transmission at 1,920 x 1080 image size
•
Super Dynamic
and ABS (Adaptive Black Stretch) technologies deliver
128x wider dynamic range compared to conventional cameras.
•
Face Super Dynamic
Range technology ensures clear face image.
• High sensitivity with Day & Night (Electrical) function:1.2 lx (Color),
0.9 lx (B/W) at F2.2
• Digital Noise Reduction: 3D-DNR ensures noise reduction in various conditions.
• Progressive scan ensures clear images with less motion blur and no
tearing even when the subject is moving.
• Electronic sensitivity enhancement: Auto (Up to 16x) / OFF
• Selectable light control modes: Indoor scene (50 Hz) / Indoor scene
(60 Hz) / ELC (maximum exposure time)
Indoor scene (50 Hz/60Hz): Flicker caused by fluorescent lightning
will be automatically compensated.
ELC (maximum exposure time): The lightning control will be automatically
performed by adjusting shutter speed in the range of ELC.
• 3x extra zoom at 640 x 360 resolution
• 2x, 4x digital zoom controlled by browser
•
VIQS
(Variable Image Quality on Specified area) technology allows
the designated
2 areas
to retain higher image quality while the
excluded area will have a decreased image quality, which enables
to use lower image file size and bit rate.
• Cropping function enables to provide whole image(1920 x 1080)
and the part image(640 x 480) simultaneously.
Up to 4 image capture areas can be specified, and it is also
possible to control the sequence.
• Fog compensation
• VMD (Video Motion Detection) with 4 programmable detection
areas, 15 steps sensitivity level and 10 steps detection size
• Privacy Zone can mask up to 2 private areas, such as house
windows and entrances/exits.
• Camera title display: Up to 20 alphanumeric characters on the browser
• Alarm sources including VMD and Panasonic alarm command can
trigger actions such as SDXC/SDHC/SD memory recording, FTP
image transfer, E-mail notification, Indication on browser, Alarm
terminal output, and Panasonic alarm protocol output.
• Built-in Microphone
• JPEG Image compression ratio can be changed by alarm so that
higher quality image can be provided.
• Prioritized stream control: One of the video streams can be prioritized
when multiple recorders or client PCs are accessing the camera so
that the recorder or the client PC can maintain the frame rate.
• SDXC/SDHC/SD Memory card slot for manual recording (H.264 /
JPEG), alarm recording (H.264 / JPEG) and backup upon network
failure (JPEG)
• H.264 max. bit rate/client and Total bit rate control allows flexible
network traffic management. Frame rate priority mode controls bit
rate and compression ratio to provide the specified frame rate.
• Internet mode: H.264 images can be transmitted over HTTP protocol.
• Multi-language: English / Italian / French / German / Spanish /
Russian / Chinese / Japanese
• IPv4/IPv6 protocol supported
• Supports SSL, DDNS (viewnetcam, RFC2136)
• Still images (JPEG) can be viewed on mobile phones via Internet.
• Onvif compliant model
Standard Accessories
• Installation Guide ..........................2 pc.
• Important Safety Instructions ........1 pc.
• CD-ROM*
1
.....................................1 pc.
The following parts are used during installation procedures.
• Installation Template Label ...........1 pc.
• Code Label*
2
.................................1 pc.
• Lens adjuster
.................................1 pc.
Optional Accessories
Smoke Dome Cover
WV-CW6SA
*1 The CD-ROM contains the operating instructions and different kinds of tool software programs.
*2 This label may be required for network management. The network administrator shall retain the code label.
