manualshive.com logo in svg

Panasonic WV-SC380 Series, Operating Instructions Manual

Share
Download
Panasonic WV-SC380 Series Operating Instructions Manual Download Page 117

11.6.5  Configure the settings relating to the auto pan function
(“Auto pan” setup menu) (SW396/SW395/SC386/SC385/SC384)

Click the [Setup>>] button of “Auto pan” on the [Image/Position] tab of the “Image/Audio” page (

®

page 98).

The settings relating to the auto pan function can be configured with the setup menu displayed in a newly
displayed window.

SW396

SC386

SC386

SW396

SW396

SC385

SC385

SW395

SW395

SC384

SC384

Position

[Left end position setup] 

SW396

SW396

 

SC386

SC386

Move the camera to the desired point to be set as the left end position point of the auto panning using the
control pad/buttons and adjust the image using the [Zoom] buttons and the [Focus] buttons.
The zoom and focus settings are set together with the start point.

Note

•

Panning, tilting and zooming operations can also be carried out on the [Image/Position] tab.

•

Adjusted zoom and focus position for the auto pan function will be applied when [Set] button of “Start
position” is clicked.

[Right end position setup] 

SW396

SW396

 

SC386

SC386

Move the camera to the desired point to be set as the right end position point of the auto panning using the
control pad/buttons, and then click the [Set] button to register the position as the right end position.

[Start position] 

SW395

SW395

 

SC385

SC385

 

SC384

SC384

Move the camera to the desired point to be set as the start point of the auto panning using the control pad/
buttons and adjust the image using the [Zoom] buttons and the [Focus] buttons.
The zoom and focus settings are set together with the start point.

Operating Instructions

117

11 Configure the settings relating to images and audio [Image/Audio]

Summary of Contents for WV-SC380 Series





















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands