![background image](http://html.mh-extra.com/html/panasonic/wv-sbv111m/wv-sbv111m_operating-instructions-manual_277966072.webp)
11.3 Configure the settings relating to H.264 images
[JPEG/H.264]
Click the [JPEG/H.264] tab on the “Image” page. (
Configure the settings relating to H.264 image such as “Max bit rate (per client)”, “Image capture size”, “Image
quality”, etc. in this section. Refer to page 70 for the settings relating to JPEG images.
H.264(1)/H.264(2)/H.264(3)/H.264(4)
[H.264 transmission]
Select “On” or “Off” to determine whether or not to transmit H.264 images.
•
On:
Transmits H.264 images.
•
Off:
Does not transmit H.264 images.
•
Default:
On
Note
•
When “On” is selected for “H.264 transmission” in “H.264(1)”, “H.264(2)”, “H.264(3)”, or “H.264(4)”
displaying of H.264 images or JPEG images on the “Live” page will become available.
•
When “On” is selected for “H.264 transmission” in “H.264(1)”, “H.264(2)”, “H.264(3)”, or “H.264(4)”, the
transmission interval of JPEG images may sometimes become longer.
[Internet mode (over HTTP)]
Select “On” when transmitting H.264 images via the Internet. It is possible to transmit H.264 images without
changing the broadband router settings configured for JPEG image transmission.
•
On:
H.264 images will be transmitted using the HTTP port. Refer to page 123 for further information about
the HTTP port number settings.
•
Off:
H.264 images will be transmitted using the UDP port.
•
Default:
Off
72
Operating Instructions
11 Configure the settings relating to images [Image]
Summary of Contents for WV-SBV111M
Page 197: ...Operating Instructions 197 Notes ...
Page 198: ...198 Operating Instructions Notes ...
Page 199: ...Operating Instructions 199 Notes ...