28
13. Add NTP test function
(Operating Instructions – Configuring the network settings [Network] – Configure advanced
network settings [Advanced] – Configure the settings relating to the NTP server)
Add a test function for time synchronization to check if it can communicate with NTP server.
[NTP test]
Select “Synchronization with NTP server” for “Time adjustment”, set the NTP server information, and
then click the “Execute” button. You can communicate with the NTP server, synchronize the time, and
check the NTP operation.
Note
・
If the NTP test succeeds, “NTP time correction has succeeded.” is displayed .
・
If the NTP test fails, “NTP time correction has failed.” is displayed .
・
When “Time adjustment” is set to “Manual”, the “Execute” button of NTP test is grayed out.
・
When “Time adjustment” is set to “Synchronization with NTP server” and the “NTP server address” is
not set, the “Execute” button for the NTP test will be grayed out.
