24
10. Add SFTP periodic image transmission to “Schedule mode” of
Schedule
(Operating Instructions – Configure the settings relating to the schedules [Schedule])
“SFTP periodic image transmission” was added to “Schedule mode” of the schedule setting.
[Schedule mode]
Select an action to be assigned to the schedule from “Schedule mode”.
“Off” is selected at the default.
•
Off:
No action will be taken for the respective schedule.
•
Alarm permission (Terminal alarm 1, 2, 3):
Alarm input (terminal alarm) will be allowed during the
period of the schedule.
•
Alarm permission (Terminal alarm 1):
Terminal 1 alarm input will be allowed during the period of the
schedule.
•
Alarm permission (Terminal alarm 2):
Terminal 2 alarm input will be allowed during the period of the
schedule.
•
Alarm permission (Terminal alarm 3):
Terminal 3 alarm input will be allowed during the period of the
schedule.
•
VMD permission:
The video motion detection (VMD) function will be active during the period of the
schedule.
•
Access permission:
Users whose access level is set to “2. Camera control” and “3. Live only” on the
[User auth.] tab (→“Configure the settings relating to the user authentication [User auth.]”) can access
the camera only in the period of schedule.
•
Recording to SD (Recording stream):
The SD recording will be performed at the designated time in
the schedule. Further, the “Recording format” is enabled only when there is a stream.
•
Image adjust 1: Scene 1:
Images are set to the image settings of “Scene file 1” at the designated time
in the schedule. When the designated time for the schedule finishes, images are set to the image
settings of “Scene file is not applied”.
•
Image adjust 2: Scene 2:
Images are set to the image settings of “Scene file 2” at the designated time
in the schedule. When the designated time for the schedule finishes, images are set to the image
settings of “Scene file is not applied”.
•
Image adjust 3: Scene 3:
Images are set to the image quality settings of “Scene file 3” at the
designated time in the schedule. Once designated time in the schedule is over, the image quality setting
is set to “Scene file is not applied”.
•
Image adjust 4: Scene 4:
Images are set to the image quality settings of “Scene file 4” at the
designated time in the schedule. Once designated time in the schedule is over, the image quality setting
is set to “Scene file is not applied”.
•
SFTP periodic image transmission:
SFTP periodic image transmission will be performed at the
designated time in the schedule.
•
E-mail permission:
While the schedule is set, e-mail notification is sent when alarm is input.
•
Reboot:
The camera reboots at the scheduled time. Can only be selected with Schedule 5.
