FEATURES
Wall Mount Bracket
Instructions
Model Nos.
WV-Q118/WV-Q118E
PLACES OF INSTALLATION
AM0205-0
3TR003444AAA
Printed in Japan
Wall box
●
Wall Box
Wood Siding Board
Strong enough to support the
camera weight
(approx. 3 k
g
{6.60 lbs})
●
Wood Siding Board
Concrete slab
Concrete slab
●
Concrete
Template
(
provided
)
Wall
1
Make four holes in the wall using the template
(provided).
Protection Cover
(provided)
Part to be cut
2
Wrap the camera cables with the Protection
Cover (provided) as appropriate to the
Diecast Case.
INSTALLATION
Cut here
4
Cut the Diecast Case as shown.
Note:
Be sure to protect the Video and Power
Cables with the Protection Cover
(
provided
).
Mounting
Screw
Rotate
15
°
Remove the Camera Mounting
Base by pulling up.
3
Remove the Mounting Screw (M3, provided),
pull up the Camera Mounting Base off the
camera, and turn the camera counterclock-
wise.
The Wall Mount Bracket WV-Q118 is provided for
mounting the Combination Camera WV-CS950 or
WV-CS954 onto the wall.
There are various ways of installing the camera as shown below.
Before attempting to connect or install this product,
please read these instructions carefully and
save this manual for future use.
• Fasten the bracket to a ceiling strong enough
to support the camera weight (approx. 3
k
g
.{6.60 lbs}).
• Wipe the bracket regularly using a soft and
dry cloth, or a cloth moistened with a water
solution of an ordinary kitchen detergent.
• Do not use chemicals for cleaning the enclo-
sure as it may damage the surface.
• All the necessary steps required for installing
this product must be taken by a qualified ser-
vice person or system installer.
PRECAUTIONS
• Be sure to use the Fall Prevention Wire.
• Do not use this bracket with any equipment
other than the WV-CS950 and the WV-CS954.
• Follow all applicable local and national elec-
trical, fire and safety codes when installing
the camera with this ceiling mount bracket.
The model numbers in this Operating Instruc-
tions are shown without suffix.
UT+O//6.3,0,0/1826ɚĘȸ/
