Panasonic WV-NW484SE Setup Manual Download Page 4

Page: 4 / 82

Preface

About these operating instructions

The Instruction Manual for this camera is comprised of three parts: this manual (PDF), Operating Manual

(PDF) and Operating Instructions.

This manual explains how to set up this camera on a personal computer (hereafter "PC") over a network.

For details on how to install this camera and how to connect it to network devices, refer to the "Operating

Instructions."

To read the PDF manual, Adobe Systems Incorporated's Adobe

Reader

is required. When Adobe

Reader

is not installed on the PC, download and install the latest Adobe

Reader

from the Adobe web site.

Trademarks and Registered Trademarks

• Microsoft, Windows, ActiveX and DirectX are either registered trademarks or trademarks of Microsoft

Corporation in the United States and/or other countries.

• Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the

United States and/or other countries.

• The SD logo is a trademark.

• Other names of companies and products contained in these operating instructions may be trademarks or

registered trademarks of their respective owners.

Viewer Software

• Images will not be displayed when the viewer software "Network camera View3" is not installed on the

PC. This software can be installed directly from the camera or by double clicking "nwcv3setup.exe" on the

CD-ROM provided, and then following the on-screen instructions.

Important

• The default setting of "Automatic installation of Viewer

software" is "ON". Follow the instructions on page 76

when the message is displayed on the information bar of

the browser.

• When the "Live" page is displayed for the first time, the

install wizard of the ActiveX control required to display

images from the camera will be displayed.

Follow the instructions of the wizard.

• When the install wizard is displayed again even after

completing the installation of the ActiveX, restart the PC.

• The viewer software used on each PC should be licensed individually. The number of installations of the

viewer software from the camera can be checked on the [Upgrade] tab of the "Maintenance" page

(

→

page 62). Refer to your dealer for the software licensing.

Summary of Contents for WV-NW484SE



















































































Search results

Summary of Contents for WV-NW484SE

Reviews:

Related manuals for WV-NW484SE

Brands by name

Popular brands

Panasonic WV-NW484SE, Setup Manual

Search results

Summary of Contents for WV-NW484SE

Reviews:

Related manuals for WV-NW484SE

Brands by name

Popular brands