Panasonic WV-CP474E Operating Instructions Manual Download Page 1

1. Do not attempt to disassemble the camera.

To prevent electric shock, do not remove screws or covers.
There are no user-serviceable parts inside.  Ask qualified service personnel for servic-
ing.

2. Handle the camera with care.

Do not abuse the camera.  Avoid striking, shaking, etc.  The camera could be damaged
by improper handling or storage.

3. The following installation should be made by qualified service personnel or system

installers.

4. Do not use strong or abrasive detergents when cleaning the camera body.

Use a dry cloth to clean the camera when dirty. When the dirt is hard to remove, use a
mild detergent and wipe gently. Then wipe off the remaining detergent with a dry cloth.

5. Clean the CCD faceplate with care.

Do not clean the CCD with strong or abrasive detergents.  Use lens tissue or a cotton
tipped applicator and ethanol.

PRECAUTIONS

Before attempting to connect or operate this product,

please read these instructions carefully and save this manual for future use.

N0102-1042

V8QA5955BN

Printed in Japan

N

19

Panasonic's WV-CP470 (WV-CP474E) series colour digital camera introduces a new level of
high picture quality and high resolution through the use of a 1/3-inch interline transfer CCD
image sensor having 753 horizontal pixels (picture elements), and digital signal processing
LSIs.  This model offers cutting-edge technology for advanced video surveillance.

PREFACE

Model No.

WV-CP470

WV-CP474E

Colour CCTV Cameras

Operating Instructions

WV

-

CP470

CP470

CP470

CP470

(Lens: Option)

The serial number of this product may be found
on the top of the unit.
You should note the serial number of this unit
in the space provided and retain this instruction
as a permanent record of your purchase to aid
identification in the event of theft.

Model No. 

Serial No. 

WARNING:

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER SER-

VICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC

SHOCK DO NOT OPEN

Wij verklaren als enige aansprakelijke, dat het product
waarop deze verklaring betrekking heeft, voldoet aan de
volgende normen of andere normatiefve dokumenten,
overeenkomstig de bepalingen van Richtlijnen 73/23/
EEC en 89/336/EEC.

Vi erklærer os eneansvarlige for, at dette produkt, som
denne deklaration omhandler, er i overensstemmelse
med den følgende standarder eller andre normative
dokumenter i følge bestemmelserne i direktivene 73/23/
EEC og 89/336/EEC.

Vi deklarerar härmed värt fulla ansvar för att den produkt
till vilken denna deklaration hänvisar är i överensstäm-
melse med standarddokument, eller andra normativa
dokument som framstölls i Direktiv 73/23/EEC och 89/
336/EEC.

Ilmoitamme yksinomaisella vastuullamme, että tuote, jota
tämä ilmoitus koskee, noudattaa seuraavia standardeja
tai muita ohjeellisia asiakirjoja, jotka noudattavat direkti-
ivien 73/23/EEC ia 89/336/EEC. säädöksiä.

Vi erklærer oss alene ansvarlige for at produktet som
denne erklæringen gjelder for, er i overensstemmelse
med følgende normer eller andre normgivende doku-
menter som fælger bestemmelsene i direktiven 73/23/
EEC og 89/336/EEC.

We declare under our sole responsibility that the product
to which this declaration relates is in conformity with the
standards or other normative documents following the
provisions of Directives EEC/73/23 and EEC/89/336.

FOR YOUR SAFETY PLEASE READ THE FOLLOWING
TEXT CAREFULLY.

WARNING: This apparatus must be earthed.

IMPORTANT

The wires in this mains lead are coloured in accordance with
the following code.

Green-and-yellow:

Earth

Blue:

Neutral

Brown:

Live

As the colours of the wire in the mains lead of this appli-

ance may not correspond with the coloured markings identify-
ing the terminals in your plug, proceed as follows.

The wire which is coloured green-and-yellow must be

connected to the terminal in the plug which is marked with the
letter  or by the earth symbol 

I

or coloured green or

green-and-yellow.

The wire which is coloured blue must be connected to

the terminal in the plug which is marked with the letter or
coloured black.

The wire which is coloured brown must be connected to

the terminal in the plug which is marked with the letter or
coloured red.

The exclamation point within
an equilateral triangle is intend-
ed to alert the user to the pres-
ence of important operating
and maintenance (servicing)
instructions in the literature
accompanying the appliance.

The lightning flash with arrow-
head symbol, within an equilat-
eral triangle, is interned to alert
the user to the presence of
uninsulated "dangerous volt-
age" within the product's enclo-
sure that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.

Summary of Contents for WV-CP474E













Reviews: