44
5
Attach the stands to the unit.
Each stand has four holes (A, B, C, D).
1) Attach the stand to the unit with the locking
caster up.
2) When attaching the unit to the stand at normal
height (1,858 mm [6
'
1
5
/
32
"
]), tighten the two
screws with washers using the hexagonal
wrench through holes A and C.
Note
•
By tightening the two screws with washers
through holes A and B, the unit will be
positioned 100 mm (3
15
/
16
"
) higher than
normal height (1,958 mm [6
'
5
5
/
32
"
]).
6
Stand the unit up and attach the
whiteboard.
1) Stand the unit up.
2) Attach the whiteboard from behind by
inserting the metal spindle of the whiteboard in
the slot inside the frame of the unit.
A
B
C
D
A
B
C
Screw
Washer
Locking casters side
A
B
C
Back
Front