51
Chapter 2 More Menus Features
When the optional 1Bin Saddle-Stitch
Finisher is installed.
Select the Staple position.
When the optional Punch Unit is installed
to the 1Bin Saddle-Stitch Finisher.
Select the Punch position.
When the optional 1Bin Finisher is
installed.
Select the Staple position.
5
Enter the desired number of copies.
6
Press the
Start
key.
z
When copying from the Platen Glass, place
the next original and follow the instructions
described on the Touch Panel Display.
z
After finishing copying, press the
Reset
key to
return to the initial screen of the currently active
mode.
2 positions on the left side
1 position on the upper left side
2 positions on the upper side
2 positions on the right side
1 position on the upper right side
1 position on the upper left
side
1 position on the upper
right side
Summary of Contents for Workio DP-C405
