Panasonic WORKIO DP-C354 Operating Instructions Manual Download Page 13

Page: 13 / 100

Chapter 2 General Settings

0 - 19

Special Paper
Tray 1

Set the paper tray which will not be used as
the automatic document feeder tray.

When you load color paper in Paper Tray 1,
select “

Tray 1

” not to be used for automatic

tray selection.

Up to 4 paper trays can be selected for
exclusion from automatic tray selection.

None, Tray 1,
Tray 2, Tray 3, Tray 4,
Bypass

None

Special Paper
Tray 2

None

Special Paper
Tray 3

None

Special Paper
Tray 4

None

Auto Paper Out
Rotate

Set whether to rotate the image, and print
when the selected paper tray is empty.

Printing on letter paper when there is no
letter size paper

Off, On

Off

Copy Output Tray

Set an output tray for the copier function.

Outer is available for selection when the
optional Paper Transport Unit is installed.

Inner, Outer

Inner

Printer Output
Tray

Set an output tray for the printer function.

Outer is available for selection when the
optional Paper Transport Unit is installed.

Inner, Outer

Inner

Fax/Email Output
Tray

Set an output tray for the Fax/Email function.

Outer is available for selection when the
optional Paper Transport Unit is installed.

Inner, Outer

Inner

Auto Reset Time

If you do not select any key within a given
time period, the touch panel goes back to
the initial screen of the current active
function automatically.

None, 30 sec.,
1 min., 2 min.,
3 min., 4 min.

1 min.

Power Save Mode
Timer

If you do not select any key within a given
time period, the machine is switched to
power save mode automatically.

1 to 240 min.

15 min.

Sleep Timer

If you do not select any key within a given
time period, the machine is switched to
sleep mode automatically.

None,
1 to 240 min.

22 min.

Language Sel.
Priority

Set whether to give priority to the display
language.

Off, On

Off

Language Default

Set the display language.
If the language is changed, the system
automatically returns to the initial function
setup screen.

English,
C. French,
Spanish

English

Panel Beep
Sound

Set the volume of Beep Sound when the
panel is selected.

Off, Soft, Loud

Soft

Key Operator

No.

Parameter

Comments

Selective Item

Standard

Setting

Summary of Contents for WORKIO DP-C354





































































































Search results

Summary of Contents for WORKIO DP-C354

Reviews:

Related manuals for WORKIO DP-C354

Brands by name

Popular brands

Panasonic WORKIO DP-C354, Operating Instructions Manual

Search results

Summary of Contents for WORKIO DP-C354

Reviews:

Related manuals for WORKIO DP-C354

Brands by name

Popular brands