Panasonic WORKIO DP-C323, Operating Instructions Manual

Page: 38 / 220

38
Chapter 2 Basic Fax Transmission
Job Build and SADF
Job Build and SADF setting enables to scan sets of originals that exceed the maximum capacity of
ADF. Special originals (like thin paper, etc.) can be fed from the ADF for Memory Transmission.
This function is available when “ Job Build and SADF ” is selected in the “ Basic Menu ”.
z The standard setting of “ 133 Job Build and SADF Mode ” is set to “ No ”. For instruction on how to change the
standard setting, refer to Fax/Email Settings in the Operating Instructions (For Function Parameters) on the
provided CD-ROM.
z This function is only available when “ 05 Memory (HOME) ” in Fax/Email Settings >Fax Parameters is set to
“ On ”.
z Function Parameters (Fax/Email Settings>Fax Parameters) “ 82 Quick Memory XMT ” is not available for this
function.
z Up to 255 pages can be stored. When the number of pages exceeds 255, the memory overfull message will be
displayed. Select “
Yes ” to start transmitting, or “ No ” to cancel.
If no action is taken within 5 seconds, the machine will start transmitting the stored originals.
1
Place Original(s).
z Refer to Placing Originals (Facsimile/
Internet Fax) in the Operating
Instructions
(For Basic Operations) of
provided booklet.
2
Press the Fax key.
3
Select “ Basic Menu ”.
4
Select “ Memory ”.
5
Select “ Job Build and SADF ”.
6
Set “ Quality Adj. ” as required.
z Refer to Setting Original Quality (see page
26)
Face Up. Up to 85 sheets
(20 lb / Letter).