Panasonic Workio DP-C265, Operating Instructions Manual

Page: 90 / 102

90
Chapter 6 Printer Settings
15 - 29 20 AppleTalk Printer Name Set the AppleTalk Printer
Name.
z When the optional Printer
Controller Module (for Adobe
PostScript 3) is installed.
There is no default value. When
the machine starts up with “
18
Apple Talk ” set to “ On ”, and “ 19
AppleTalk Zone Name ” and “ 20
AppleTalk Printer Name ” not
set, “Panasonic DP-XXXX and
the lower six figures of MAC
Address” will be automatically
set up.
Up to 31 characters Panasonic
DP-XXXX-
the lower
six figures
of MAC
Address
21 AppleTalk Type Name The machine detects and
displays the AppleTalk type
name on the Touch Panel
Display.
z The AppleTalk type name is
displayed, but cannot be set.
z When the optional Printer
Controller Module (for Adobe
PostScript 3) is installed.
22 NetWare Set “ On ” to use NetWare. Off, On Off
23 NetWare Frame Type Set the NetWare Frame Type. 802.3, 802.2, Ether-II,
SNAP 802.2
24 Selected Frame Type The machine detects and
displays the frame type on the
Touch Panel Display.
z Frame type is displayed, but
cannot be set.
25 NetWare Mode Select the NetWare Mode.
• Pserver
The machine is used as Print
server, and prints the waiting
job stored in the machine.
• Rprinter
The machine is used as
Remote Printer, and prints
data which is sent from the
Print server.
Pserver, Rprinter Pserver
26 NetWare Printer Name Set the NetWare printer name. Up to 31 characters
27 Print Server Name Set the Print Server Name. Up to 31 characters
28 Print Server Password Set the Print Server
Password. Up to 31 characters
No. 20 to 23, 25, to 28
After setting any of these parameters, turn the
machine’s power switch Off, and then On again.
Key Operator Mode
No. Parameter Comments Selective Item Standard
Setting