Panasonic Workio DP-C265, Operating Instructions Manual

Page: 88 / 102

88
Chapter 6 Printer Settings
Key Operator Mode
No. Parameter Comments Selective Item Standard
Setting
0 - 14 00 Print Printer Settings Print the Printer Settings list.
To cancel printing the parameter
setting list, press “
Stop ” and
“ OK ”.
While processing the
cancellation, panel operation is
denied, and an error beep is
produced.
The feeding paper(s) will be
ejected before completing the
above cancellation operation.
If setting a parameter, an
asterisk mark (*) will be added
before the parameter number.
Stop, Start Start
01 Job Completion Time Set the time-out period if the
machine does not receive a print
signal from the computer for a
specified time.
Select “
Input ”, and then enter
the job completion time.
1 to 999 (Sec) 180 (Sec)
02 Page Protection Set value to “ On ” to use page
protection.
Off, On Off
03 Error Page Print Set value to “ On ” to print the
data of an error job.
Off, On On
04 Spool Function Set value to “ On ” to set the
spool function.
Off, On On
05 Text Print Set value to “ On ” to print a text
with no pictures.
Off, On On
07 Font List Print (PCL) Print the PCL font list. Stop, Start Stop
08 Font List Print (PS) Print the PS font list.
z When the optional Printer
Controller Module (for Adobe
PostScript 3) is installed.
Stop, Start Stop
09 Mailbox Data Holding Set the limit of storing the data in
the mailbox. When “
Infinity ” is
set, data is not deleted.
Infinity, 1 day, 2 days,
3 days, 4 days, 5
days, 6 days, 7 days 7 days
10 Delete Mailbox Data Select the mailbox data to be
deleted.
• All
All data is deleted from the
mailbox.
• Before
Deletes the data which is
received before the specified
date.
All, Before Before