Panasonic Workio DP-C265, Operating Instructions Manual

Page: 79 / 102

79
Chapter 4 Fax/Email Settings
6
Select “ 120-159 ”, and then select
(4 times).
z Each Fax Parameter can be directly
selected by inputting the corresponding
number with the Keypad for quick operation.
If you know the parameter number, enter the
number with the Keypad, and then press the
Start key.
Ex: In step 6, enter “142” with the Keypad,
and press the
Start key to select “ 142
Relay XMT ”.
7
Select “ 142 Relay XMT ”.
8
Select “ Valid ”, and then select “ OK ”.
z
Advance to Relay XMT Report (Fax
Parameter 143) on the right column, and
set the relay XMT report.
Relay XMT Report (Fax
Parameter 143)
Select how the Relay XMT Report is sent to the
originator.
1
Select “ 143 Relay XMT Report ”.
2
Select how the Relay XMT Report is
sent, and then select “
OK ”.
3
Select “ Close ”.
z Advance to Relay XMT Password (User
Parameter 36) (see page 80), and set the
relay transmission password.