Panasonic Workio DP-C265, Operating Instructions Manual

Page: 13 / 102

13
Chapter 2 General Settings
0 - 19 05 Special Paper
Tray 1 Set the Paper Tray which will not be used
as the automatic document feeder tray.
Ex :
When you load colour paper in Paper Tray
1, select “
Tray 1 ” not to be used for
automatic tray selection.
z Up to 4 Paper Trays can be selected for
exclusion from automatic tray selection.
None, Tray 1,
Tray 2, Tray 3, Tray 4,
Bypass
None
06 Special Paper
Tray 2 None
07 Special Paper
Tray 3 None
08 Special Paper
Tray 4 None
09 Auto Paper Out
Rotate Set whether to rotate the image and print
when the selected Paper Tray is empty.
Ex :
Printing on A4R size paper when there is
no A4 size paper
Off, On Off
10 Copy Output Tray Set an Output Tray for the Copy function.
z “ Outer ” is available for selection when
the optional Paper Transport Unit is
installed.
Inner, Outer Inner
11 Printer Output
Tray Set an Output Tray for the Print function.
z “ Outer ” is available for selection when
the optional Paper Transport Unit is
installed.
Inner, Outer Inner
12 Fax/Email Output
Tray Set an Output Tray for the Fax/Email function.
z “ Outer ” is available for selection when
the optional Paper Transport Unit is
installed.
Inner, Outer Inner
13 Auto Reset Time If you do not select any key within a given
time period, the Touch Panel Display goes
back to the initial screen of the current
active function automatically. None, 30 sec.,
1 min., 2 min.,
3 min., 4 min.
1 min.
14 Power Save Mode
Timer If you do not select any key within a given
time period, the machine is switched to the
Power Save mode automatically. 1 to 240 (min.) 15 min.
15 Sleep Timer If you do not select any key within a given
time period, the machine is switched to the
Sleep mode automatically. None,
1 to 240 (min.) 22 min.
17 Language Default Set the display language.
If the language is changed, the system
automatically returns to the initial function
setup screen.
z
Standard setting differs by country.
18 Panel Beep
Sound Set the volume of beep sound when the
panel is selected. Off, Soft, Loud Soft
Key Operator Mode
No. Parameter Comments Selective Item Standard
Setting
Continued on the next page...