Panasonic Workio DP-8020, Operating Instructions Manual

Page: 152 / 194

152
Setting Your Machine
Fax Parameters
155 PRINT ROUTED
DOCUMENT
*1 Inc. only Selecting whether a received fax to be routed is always
printed, or only when the routing operation fails.
2 Always
156 PRINT FORWARDED
DOCUMENT
*1 Inc. only Selecting whether a memory received fax, or email to be
forwarded is always printed or only when forwarding is
incomplete.
2 Always
157 TRANSACTION
JOURNAL
*1 Invalid Selecting whether the machine sends a transaction journal
to the pre-programmed email address.
2 Valid
158 PC REMOTE UPDATE *1 Invalid Selecting whether the machine will accept commands from
an email application, to:
(a) Program the Internet Parameters
(b) Program the Auto Dialer
(c) Allow retrieval of the Journal
2 Valid
159 SUBJECT LINE ENTRY *1 Invalid Selecting whether the "Subject" line can be programmed
during each transmission.
2 Valid
160 DEFAULT DOMAIN 1 Invalid Selecting whether the machine accepts to insert the Default
Domain when entering Manual
Em
ail Addressing.
*2 Valid
162 TIFF VIEWER URL 1 None Selecting whether to include the URL address in the email
message body.
*2 English
3
Japanese
163 ROUTING HEADER *1 Invalid Selecting whether to add the Header Print information of the
Routing Station on the top edge of each routed pages.
2 Valid
164 IFAX XMT HEADER
(Email only)
*1 Included Selecting whether to include the header when sending a
document to an addressee in the same Domain as specified
in the Default Domain parameter. (This is useful when using
the machine to scan documents back to your PC)
Note: When sending to a Domain other than as specified
in the Default Domain parameter, the header will be
included regardless of the selection.
2 Not included
168 CC/BCC STATION *1 Invalid Selecting whether to allow the CC/BCC email address(es)
to be entered.
2 Valid
170 SMTP
AUTHENTICATION
(See Note 3)
*1 Invalid If you transmit to the SMTP Server, User Name and
Password are used for authentication. Selecting "
Valid "
allows you to set up the User Name and Password.
2 Valid
171 POP BEFORE SMTP
(See Note 3)
*1 Invalid If you transmit to the SMTP Server, POP User Name and
POP Password are used for authentication.
2 Valid
172 DIRECT IFAX XMT *1 Invalid Selecting whether to be prompted during Phone Book
registration if the station you are programming is to receive
Internet Fax directly without going through a Mail Server.
2 Valid
173 DELIVERY NOTICE
(HOME)
*1 Off Setting the home position of whether to request a Message
Disposition Notification (MDN) for a delivery processing
confirmation indicating that the message (email) was read,
when sending an email/Internet Fax.
This setting will be the default value for the Function Select
Mode (F8-2).
2 On
No. Parameter
Setting
Number
Setting Comments