Panasonic WJ-NX400G-54000T6 Operating Instructions Manual Download

Page: 195 / 224

195

Update the firmware

To update the firmware of the recorder to the latest version, proceed as follows.
Refer to page 69 for the operation procedures if the software is saved on the USB medium.

Step 1

Download the firmware of the latest version onto a
hard disk drive of a PC.

Step 2

Click the [Maintenance] button and then click the
[System management] tab.

Group display of camera tree
[Group display]

Set whether to use the group display or not.

On: Uses the group display.
Off: Does not use the group display.

Default:

Off

[Group title]

Enter a group title to display for each group (G1 ~ G8)
(within 16 characters).

[Grouping]

Assign the camera to each group (G1 ~ G8).

Step 3

Designate the downloaded firmware by clicking the
[Browse...] button of "Firmware update".

Step 4

Click the [Execute >] button.

→

The confirmation window will be displayed to start
the update procedure.

Note:

• Depending on the firmware to be updated, it may

take up to 30 minutes for upgrading, leaving the
start screen displayed.

• Contact your dealer for further information about

the firmware update.

Set the web browser [Web browser]

Set the settings related to the display of the web browser such as a group title of the camera.
Click the [Monitor] button on the setup menu and then click the [Web browser] tab.

[Setup on browser]

Summary of Contents for WJ-NX400G-54000T6

































































































































































































































Search results

Summary of Contents for WJ-NX400G-54000T6

Reviews:

Related manuals for WJ-NX400G-54000T6

Brands by name

Popular brands

Panasonic WJ-NX400G-54000T6, Operating Instructions Manual

Search results

Summary of Contents for WJ-NX400G-54000T6

Reviews:

Related manuals for WJ-NX400G-54000T6

Brands by name

Popular brands